Hubbell Industrial Controls, Inc. 

4301 Cheyenne Drive, Archdale, NC  27263 

Phone (336) 434-2800  •  Fax (336) 434-2803 


LXi-2400 Primary Resistor with ATS

LX-1400 Primary Resistor

Description

Hubbell Fire Pump Motor Controllers with Automatic Transfer Switches (ATS) are designed to comply with the latest standard of the National Fire Protection Association for the installation and operation of centrifugal Fire Pumps (NFPA-20).

Model LXi-2400 is a combined automatic and manual reduced voltage primary resistor fire pump controller, applied where the capacity of the power source does not permit full voltage starting of the motor. The controller is used with standard three (3) lead squirrel cage motors. High capacity stainless steel resistors are supplied, which reduce inrush current to approximately 50% of normal. An adjustable timing relay is provided to control the time between reduced voltage start and full voltage run. A manual "emergency run" operator is supplied for emergency starting. When the operator is pushed "on" the motor starts and runs at full voltage until the operator is pushed "off".


Drawings and Publications

Volts HP Range Dimensions Schematic Field
Connection
Manual
200-208 15-60 24CE0011 24CS0011 24CF0011 Pub 193C
Pub 201 ATS
220-240 15-75
380-415 15-60
440-480 15-40
380-415 75-125 24CE0021 24CS0011 24CF0011 Pub 193C
Pub 201 ATS
440-480 50-150
200-208 75-150 24CE0031 24CS0011 24CF0011 Pub 193C
Pub 201 ATS
220-240 100-200
380-415 150-300
440-480 200-400

Catalog Literature

LXi-2400 Specifications
July 2002
Brochure 6100M
May 2004
Price List 6100M
October 2002
Emergency Ratings
LX-450 Schematic
LX-450 Field Connection
LXi-450 Manual
  

Home | Contact us | Transportation Routing Instructions | Terms of Use | Conditions of Sale | Site Map

Hubbell Industrial Controls
Hubbell Incorporated 2017
All rights reserved.